Applies to app version 1.12.x or later on Android

IBSS Inspire can be provisioned automatically via the Device Provisioning Service (DPS).

Note: The Inspire app must first be installed onto the device from the Play Store.

Device Provisioning Service

Using the device provisioning service, onboarding Inspire is straight forward:

1. Provide the following information to ICONICS.
   • The Configuration ID of each device that is displayed on the initial Inspire page and the space that the device serves.
   • (optional) The external IP address of the site/location.

2. When these have been provided, they will be added to the DPS service to which the Inspire app will connect.
   On start-up, the Inspire app will first attempt to connect to the DPS as shown below.

3. Once connected and a valid Configuration ID is found, Inspire will be given the specific customer deployment information.

4. On successful connection to the customer specific deployment, Inspire will then configure the app.

5. Once completed, Inspire will display a final congratulations page as shown below. Tapping run application will start the application running in the configured mode.