Inspire OS and Hardware Requirements

Written By Sam Walton (Super Administrator)

Updated at September 2nd, 2024

The IBSS platform supports the following Mobile OS for Inspire together with the following specifications.

Android

Supported Versions
Minimum Recommended Hardware
Inspire is supported on devices running Android 6 or higher in the following modes:
- Inspire Lobby
- Inspire Floor
- Inspire Schedule
CPU: 64-bit Quad-core A73 + Dual Core A53 (or better) 
RAM: 4 GB DDR4 (64-bit) (or better) 
GPU: Mali-G52 MP4 GPU / 3D Graphic Engine (4K) (or better)

Previously validated devices

Make
Model
Preferred Deployment Method
Minix
NEO-U22-XJ
NEO-X39
AV supplier or Client IT/MDM
Elo
Backpack® 4
AV supplier or Client IT/MDM
Giada
DN74
AV supplier or Client IT/MDM
ProDVX ABPC-4220
AV supplier or Client IT/MDM

Preferred deployment method

There are 2 methods of deployment that can be used to distribute IBSS apps to hardware devices.

Client MDM

As these devices will typically be sitting on an IT network and within a client building, the natural ownership of the devices falls under the client IT department. Employing Mobile Device Management allows the IT department to centrally manage the security of these devices. 
By using an MDM tool, the IT department can centrally push the IBSS Apps to the devices. The app .apk file will be provided by ICONICS to the IT department for verification and deployment. 

AV Supplier or Client IT

Where ownership/responsibility of the devices does not lie with the client IT department, the AV supplier or client can deploy the IBSS Apps onto the devices. For this to work, the selected device must have an appropriate App Store on the device. Supported App Stores include:
- Google Play Store
- Amazon App Store

Device testing

As ICONICS does not supply hardware, we are only able to provide information on previously tested devices and cannot make recommendations on device suitability as this would typically fall under the remit of an AV consultant. It is advised that the applications are tested on a single device against a representative system before commissioning.

⚠️ Set the time zone on the device to match the time zone for the building.